Archery Talk Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3,107 Posts
Discussion Starter #1
Hello all,
I have an ultra pro that I installed on my tribute....What is the best way to go ....rope connected to the slider or buss cable? It seems like mounted to the buss cable the rrope is pretty long..like it would hit the arrow???
 

·
Registered
Joined
·
249 Posts
My QAD Ultra is attached to the Buss and

works great, the dealer that I bought my Tribute from has one on his personal Tribue and puts QAD's on every one he can. He installed it on the buss and several thousand shots later it's still doing fine. I do admit that I reach over and pull the cord over once in awhile (as though:confused: that would do any good!). Good luck with it.
 

·
Registered
Joined
·
98 Posts
Well I have a Pro Ld I put on my tribute and I tied it to the down cable correctly but it gave me a 3% loss in lett off and took away my vally which was not going to deal with. I then used the little clamp included and clamped it behind the slider and it works perfectly. Hope this helps.
 

·
Registered
Joined
·
3,107 Posts
Discussion Starter #6
thanks for the info

I was having problems with the rope hitting the fletching. Put it on the slide...works like a charm.
 
1 - 6 of 6 Posts
Top