Joined
·
136 Posts
bump
Question about setting up the TRU BALL T-Handle release sensitivity screw
Hi,
I was reading through the instructions to set the sensitivity screw for the jaws of this release. The plan is to set this up for a 50 lb Bear Anarchy
http://www.truball.com/media/Downloads/Inst_PDF/THandle%20Thumb.pdf
Questions
(1) I'm trying to understand why you would want the sensitivity set so close to it releasing just past your draw weight. Just thinking I went to prevent an accidental release.
(2) Once I have the sensitivity set, what is the best way to prevent the screw from moving? I read about use of lock tight but wanted to see what other people are using.
Thanks
I was reading through the instructions to set the sensitivity screw for the jaws of this release. The plan is to set this up for a 50 lb Bear Anarchy
http://www.truball.com/media/Downloads/Inst_PDF/THandle%20Thumb.pdf
Questions
(1) I'm trying to understand why you would want the sensitivity set so close to it releasing just past your draw weight. Just thinking I went to prevent an accidental release.
(2) Once I have the sensitivity set, what is the best way to prevent the screw from moving? I read about use of lock tight but wanted to see what other people are using.
Thanks
1 - 4 of 4 Posts
Some people like really light trigger options because you won't have to punch the trigger and put your shot off target but personally I like a heavy trigger it feels like I have more control. Lock tight is really the best way to keep the screw in place I have not really heard f other techniques that worked as good.
Joined
·
136 Posts
Thank you for your response.
1 - 4 of 4 Posts
