Archery Talk Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
83 Posts
Discussion Starter · #1 ·
I have a brand new invader with less than 50 shots on it. Its accurate so I dont know if this is a problem or not. I noticed that the rail on the right side sits a little higher than the left side, about an eighth of an inch. I noticed that the camo is wearing off in the middle and towards the rear (trigger box) . The rail ends towards the riser are equal. Is this normal or is my barrel out of spec?
 

·
Registered
Joined
·
155 Posts
Hello, Merky:

Please contact TenPoint Customer Service at 330-628-9245 for assistance.

Bryan Zabitski
TenPoint Customer Service
 

·
Registered
Joined
·
83 Posts
Discussion Starter · #5 ·
I post pics soon, im hoping its just a yoke tuning
 

·
Registered
Joined
·
83 Posts
Discussion Starter · #6 ·
Update*

Got the bow back from the shop where I bought it and the right cam timing was off a little, so that was straightened out, the arrow retention spring was adjusted up, from what they said the retention spring was pushing the back of the bolt down to where the front of the arrow was lifting a little. So I"ll see how that works out. And as far as me thinking the rail was uneven. The rail top angles slightly down towards the track where the arrow rides so what I thought was uneven was just the bevel from the rail. This is what I am told. The bow shoots great so I will just shoot it and see.
 
1 - 6 of 6 Posts
Top