[kzz1king]

I am installing new limbs. Can I reuse the stickon limbsavers? If so what glue? Or am I just being to cheap? Thanks

 

[preyquester]

reuse, just peal off old glue & use stuff called shoe goo best i ever found...:darkbeer:

 

[Fire&Ice]

You can get some good 3m 2 sided tape the thin stuff/ But make sure the limbs and saver are clean :thumbs_up your not cheap they are still good so why not!

 

[Dale_B1]

Clean off the old sticker, you can get new stickers from limb saver--------NEVER EVER GLUE THEM ON unless you don't care about your new limbs.

 

[ozarkmtnhunter]

You can get some good 3m 2 sided tape the thin stuff/ But make sure the limbs and saver are clean :thumbs_up your not cheap they are still good so why not!

This is what I do. Works good!

 

[firewood]

limbsavers

I switched some limbsavers from an old bow to the new one and they didn't want to stay on very well. Tx'd Limbsaver and they sent out some stickers. Got em in about a week. They work fine. No glue. I think they get these calls once in awhile and have what you need.

 

[NocBuster]

I am installing new limbs. Can I reuse the stickon limbsavers? If so what glue? Or am I just being to cheap? Thanks

Yep your being cheap :wink:

Just Kidding. Ive done it before and have always used a hot glue gun.

 

[smarpo]

I tried to use fletchtite to reuse mine, put too much glue on and took some of the camo off off the new limbs around the limbsaver when I wiped the excess glue off.

 

[Elk4me]

I have a roll of 3M 2 sided tape I bought at the hardware store and been doing it for yrs. I comes with red plastic on the roll!