[Ktmrider.rr]

I just picked up a react pro. It says to set first pin at 20 then third at 40 and then it will be set for 20,30,40,50,60. It I do first pin @20and third @50 will I be good for 20,40,50,60,70. With the speed of my bow there's not much difference in using my 20pin on 20 or 30.

Thanks

 

[ar1220]

You can always try and see it may not work out exactly like that because of the adjustment and how it's calibrated

 

[hray]

No It won't. You can set your first pin at 20 and your 4th pin at 50 and all other pins will fall in place. Basically you got 5 pins for 20,30,40,50,& 60. I have the react V5 and it is easy to set up and the tech works by setting the 2 pins.

 

[ZX-6R_Zac]

Its a good starting point, but you may have to tweak it due to variables.

 

[hray]

You could try 20 40 60 80 100 but I don't know.

 

[Gdjones67]

I'd give it a shot and see what the result is. I had the react sight for a while and due to the variables from one bow to another my 20 and 40 were spot on but my 50 pin was more like 55 and my 60 was more like 65. Not a big deal just something i had to be aware of. I think if you wanted to set your 3rd pin to 50 yds. you might find you're close enough to 60 and 70 for you to be comfortable shooting little pin high or low. You'd just have to remember your 4th pin was more like 65 yards and your 5th pin was 78 or whatever they end up being. Also your 2nd pin will be off but it moves significantly less so your pins could end up looking like 20,35,50,65,78

 

[Ktmrider.rr]

I'd give it a shot and see what the result is. I had the react sight for a while and due to the variables from one bow to another my 20 and 40 were spot on but my 50 pin was more like 55 and my 60 was more like 65. Not a big deal just something i had to be aware of. I think if you wanted to set your 3rd pin to 50 yds. you might find you're close enough to 60 and 70 for you to be comfortable shooting little pin high or low. You'd just have to remember your 4th pin was more like 65 yards and your 5th pin was 78 or whatever they end up being. Also your 2nd pin will be off but it moves significantly less so your pins could end up looking like 20,35,50,65,78

That would be way to complicated for me😂 my 5 pin now is set 20,40,50,60,80. Guess I'll mess with it when I get it on.

 

[Approachme]

Might work but I'm not sure. The way the pins adjust is all based on the 20 yard pin which doesn't move. To sight in 20 you adjust the housing, after that the rest adjust either closer together (faster bow)or further from each other (slower bow) all based on the 20. The better way to sight in is to sight in your 20 then your 50 or 60 if you can then you'll be more micro tuned than sighting in 20 and 30. Good luck, hope it works. If it doesn't you can always get the react pro 7

 

[umpquah2odesign]

I set my 20 (being more focused on verticle rather then horizontal adjustment)then shot a couple at 30 just to help not have to chase arrows on my 50 and 60. Once 30 was fairly close i went to 50 and 60. Fine tuning thoughs brought my 30 and 40 dead on. Everyone has opinions on this sight but I love mine.

Sent from my SM-G975U using Tapatalk