Archery Talk Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
102 Posts
Discussion Starter #1
When I draw my Reezen 6.5, the cam comes into contact with the suppressor. I made sure the cable is in the center of the timing window. ATA is right on. Any ideas what could be causing this?
 

·
Widewater Hunt Club
Joined
·
9,387 Posts

·
Registered
Joined
·
102 Posts
Discussion Starter #3
That makes sense. Mine is a 30" dl cam, which obviously would be a larger diameter. I was thinking about making an 1/8" shim to go under the suppressor arm, but if Mathews makes a longer arm then that would be better.
 

·
Registered
Joined
·
1,547 Posts
You can also try putting a few more twist in your cable to rotate the cam a little bit further and that can also help.
 

·
Registered
Joined
·
3,138 Posts
Mine did the same thing. Take it to your dealer have him order the replacement arm. It is about 1/8 an inch longer. Problem solved.
 
1 - 5 of 5 Posts
Top