Archery Talk Forum banner

Removing a arrow point

379 Views 4 Replies 4 Participants Last post by  hitman846
I was setting my nibs and did not get one to seat all the way down. Will heating the tip to remove it mess up the carbon? Thanks in advance.
1 - 5 of 5 Posts

· Registered
Joined
·
2,655 Posts
Heat the point tip only. Go slow heat 30 seconds and try moving the point. If it did not move heat for 10 seconds and try again. Repeat as necessary. DO NOT PUT ANY HEAT DIRECTLY ON THE SHAFT!!!
 

· Registered
Joined
·
934 Posts
pull the knock out and stick a drill bit inside the size of the inside of arrow with blunt in and hold in hand and swing bown wards and it will usally knock the tips out:darkbeer:
 

· Site Administrator
Joined
·
28,444 Posts
pull the knock out and stick a drill bit inside the size of the inside of arrow with blunt in and hold in hand and swing bown wards and it will usally knock the tips out:darkbeer:
that will work but................look out,wear safety glasses and don't have anyone around you.....it will go "a flyin'"
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top