Archery Talk Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
239 Posts
Discussion Starter #1
I have a Ripcord I want to put on my 101st Airborne, but it doesn't seem to be going well. If I line up my arrow with the berger holes when the rest is up, it doesn't fall all the way down when released. If, on the other hand, I set the rest up so it is flat and not touching the rest when down, the arrow is well above the berger holes. If my arrow is above the berger holes, then my nock etc, are going to be further up my string. Is this a problem? Will I have nock travel, tuning issues?
 

·
Registered
Joined
·
2,374 Posts
dont drill higher holes

i will line up good, then when you shoot it.....well lets just say you will need to buy a new rest fork. dont ask...guyt
 
1 - 2 of 2 Posts
Top