Archery Talk Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
1,001 Posts
Discussion Starter #1
why is there holes on top of each of the limbs where the axles r? been scratching my head over this THANKS
 
Joined
·
9,027 Posts
That is where you press the bow with the fingers. It was designed that way for strength minus the weight of a solid point to press...for lack of a better way to put it. Here are the pictures of how to press...I did not extend the fingers so this is an example. Cheers!
Fred
P1010103.jpg P1010102.jpg P1010101.jpg
 
Joined
·
9,027 Posts

·
Registered
Joined
·
2,381 Posts
I would bet an engineer would say that it's plenty strong with the hole and it would only add weight to fill them solid. The same reason risers are not solid.
 

·
Registered
Joined
·
330 Posts
I've got an RPM as well. You guys have to take the draw stops out to press them? I have seen a lot of people talking about that lately, but didn't see any answer about this bow in particular.
 

·
Registered
Joined
·
2,549 Posts

·
Registered
Joined
·
916 Posts
Never to old to learn something new. Thanks for the pics and videos also.
Have a good one
 
1 - 13 of 13 Posts
Top