Archery Talk Forum banner

S40 hack question

369 Views 2 Replies 3 Participants Last post by  buckshot164
I'm going to do my first hack and I was wondering if 24 awg will work or does it need to be 30 awg. Its going to be a s40 four wire hack. Thanks Tim
1 - 3 of 3 Posts

· Registered
Joined
·
233 Posts
You really need to use 30AWG wire for the hack. You will be glad you did. 30AWG wire will finagle around inside the camera just fine but you will have trouble with larger wire. Also be sure to use "wire wrap" wire.

I don't know what you are using for the connector between your camera and the control board, but if you use the 4-wire servo such as supplied by Yeti, one side of that connector has 30AWG wire wrap wires on it and they are plenty long enough to do the hack. In fact, you will have to shorten some of the wires.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top