Archery Talk Forum banner

Saunders Hyper Glide torquing my bow.

1192 Views 5 Replies 3 Participants Last post by  Outsider
I have set up my newly powder coated 2014 Hoyt Pro Edge Elite. When I put it on draw board and check cam lean it always shows as my bow have some torque in it. Took me a while but find out that the torque came from the Saunders Hyper Glide. As soon as I put the stock Hoyt slider the torque went away. I did take some measurements just to compare the Saunders Hyper Glide with Hoyt slider. It looks like Saunders bring the cables closer to the sliding guide (away from the bow) and hoyt slider keep them closer to the bow. I did took some pictures just to show the difference. Everything set up the same in both test. Just swipe the sliders.

Saunders Hyper Glide
View attachment 2081510

View attachment 2081514

Hoyt Slider
View attachment 2081515

View attachment 2081517
1 - 1 of 6 Posts
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.