Archery Talk Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
311 Posts
Discussion Starter · #1 ·
ok here's the deal,

I put in a good quality 6x scope for FITA, I had to put in a clarifier peep.

When I looked through the scope at full draw everything is nice and clear.

One Problem!!!

When I look through the scope at my target I lose my pin. I cannot see it at all.

If I focus on the pin of coarse I can't aim.

I have tried orange dots and circles, cross hairs, and fiber optic pins. In front of and behind the lens. Nothing!!!!


Please help, any suggestions would help.
 

·
Registered
Joined
·
1,765 Posts
That is the problem with clarifiers. What was suggested to me by a scope company, was to get rid of the clarifier and use a small peep. Then adjust your sight bar in or out to fine tune the focus. I had done this with a 6X lens and had good results. I wouldn't go to a micro peep but start with the next size up and go from there. I settled with a 1/16" The target is slightly blurry but anything smaller and it was too dark for me.

Darrel
 
1 - 2 of 2 Posts
Top