Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
160 Posts
Discussion Starter #1
Tonight at league my son's Scott Backspin had the sear come loose. It slid half way out, and caused the shot to go off while he was letting down. The moon didn't move at all as it is tightened into place just fine by the screws holding in place. On older style hinges, the moon tightens into the sear locking both the moon and the sear into place. On this hinge there doesn't seem to be anything pressing the sear in place. Is there a trick I'm missing on the Backspin to hold the sear in place? Thanks.
 

·
Registered
Joined
·
160 Posts
Discussion Starter #3
Oh. Just took it apart. It is in the very back of the moon, out of sight when set to shoot. Thanks Coug09.
 
1 - 3 of 3 Posts
Top