Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
664 Posts
Discussion Starter #1
My trusty Old Faithful's rope shoes sign of fraying and I took the old rope off. I'm in a quandry. How did they put the new rope back in that little hole? Anybody done this or do I have to send it back?
Thanks for any good advice
 

·
Registered
Joined
·
51 Posts
litegun, if you have the correct size release rope, just get a piece of fastflite serving or something similar and make a loop. Push the loop through the hole in the release and thread the release rope through the loop, then pull the fastflite thread back and the release rope should come through the hole. If you can't get the correct size release rope, you may have to enlarge the hole in the release slightly. Hope this helps.
aussie.
 

·
Registered
Joined
·
664 Posts
Discussion Starter #3
Thanks Aussie. I will enlarge the hole as any attempt to thread the rope back through the hole has failed and frustration has built to the try something different level.
Thanks again
 
1 - 3 of 3 Posts
Top