Archery Talk Forum banner
1 - 13 of 13 Posts

Lucas Cooney

· The Official AT Video Content Providers
Joined
·
996 Posts
Discussion starter · #1 ·
For the past few months I've been testing out the Scott Select Hinge Release and I figured it was time to share my long-term review.

Save 20% at Next Level Pocketknives | Kershaw Knives
with the discount code ARCHERY20

The Scott Select is all about adjustability. This release allows you to shoot it as a two-, three-, or four-finger system. If you go with a three- or four-finger set up, you can adjust the angle of the third and fourth finger.

This release also boasts a two-moon design, which means you can easily switch from click to no click. If you choose to use a click, you can adjust how much movement is required between the click and when the release actually fires. Finally, you can adjust how hot/cold the release is set at. Personally, I set my hinge release very cold (almost to the far end of that spectrum), as that is how it feels most comfortable to me.

Available in two sizes (medium and large), the Scott Select is made of aluminum and the there are grooves built into the forefinger and middle finger positions, providing some additional grip when your hands get a little sweaty on the line.

While I typically shoot my hinge release with a click, it became apparent fairly quickly that wasn't going to work for me with the Scott Select. Whether it was the sound of the click, the shape of the release, my mental state, or a combination of all three, I just didn't like shooting this release with a click. Fortunately, removing the click is a very quick and easy job.

While the release came out of the box with the four-finger set up, I much prefer to shoot a hinge as a three-finger design. Having a fourth finger seems to lead me more actively controlling the release in my hand, which is not very beneficial to my shooting. At some point I'll try shooting this without any of the finger extensions, but that is a story for another day.

Overall, I've been quite happy with this release aid. The build quality is solid, the adjustability is a big bonus, and it feels comfortable in the hand. I might opt for an aftermarket thumb peg at some point, but I'll look into that a little bit later.

 
Just a comment on sizing (I left a comment on YouTube but I figured I'd leave this here as well):

The release comes in medium and large, but the index and middle finger beds (i.e. the main body of the release) are the exact same size. The size of the finger attachments for the ring and/or middle finger are the parts they actually changed to distinguish the two sizes.
 
Does this release auto return for the next shot?
Just a comment on sizing (I left a comment on YouTube but I figured I'd leave this here as well):

The release comes in medium and large, but the index and middle finger beds (i.e. the main body of the release) are the exact same size. The size of the finger attachments for the ring and/or middle finger are the parts they actually changed to distinguish the two sizes.
Not sure if you've shot this release much, but do you know if it auto returns after each shot via a ruberband or magnet? And do you know if it flops around and makes noise like the UV Hinge 1 was trashed about? Thanks.
 
Does this release auto return for the next shot?


Not sure if you've shot this release much, but do you know if it auto returns after each shot via a ruberband or magnet? And do you know if it flops around and makes noise like the UV Hinge 1 was trashed about? Thanks.
The hook has a rubber band under it and keeps from needing to reset the hook (which they really should move on from and use a spring or magnet). The head still moves freely, though, so if you shake it, it can still make noise.
 
The hook has a rubber band under it and keeps from needing to reset the hook (which they really should move on from and use a spring or magnet). The head still moves freely, though, so if you shake it, it can still make noise.
Ok, sweet. Good to know. I concur on the rubber band system. When a release costs over $200 and is relying on a rubber band while built to be shot hundreds if not thousands of times .... Yeah ... Anyway, I guess I'm happy it has a rubber band rather than nothing. Bummer on the shaking noise. But, hopefully that wont be too bad. I decided to pick one up on AT Marketplace today. So I appreciate your reply here.

Happy Shooting.
 
Does this release make noise when moved around like the Ultraview Hinge 1 did from the metal flopping around?
It can if your real careless and intentionally swing the head back and forth. In normal use it's not bad. I took some small pieces of adhesive back velco( soft side) and placed it on the back of the head where it would normally make contact with body. This reduces the overall noise by overall 50%. While the pic is of my Ascent, the same thing can be done on the Select.

Image
 
@mnjeff yes, I can confirm mine came with rubber bands. It an early-ish model, so barring any odd changes, a new one should come with extra rubber bands. As @Phanuel mentioned, you can get other band options. Dental bands would be closer to what it comes with than most o rings. All in all, this piece is not very influential on the shot itself, close to 0% influential. So a band that isn't exact but close enough will sure work and work just fine.
 
1 - 13 of 13 Posts