Archery Talk Forum banner

Setting Katera string stopper.

654 Views 7 Replies 8 Participants Last post by  BUSH in 04
Whats the sweet spot for the stopper on the Katera? I just picked one up and need to get it dialed in pretty quick. Right now the shop set it with quite a bit of tension against the string. Should there be a gap?
1 - 8 of 8 Posts

· Registered
Joined
·
5,341 Posts
I have not seen anything about the string stopper setting.

My Katrera came with a very slight gap between the string and the bottom of the slot of the stopper, don't know if that is right.
 

· Registered
Joined
·
585 Posts
The stopper on my vulcan is set to just touch the string without puttin any pressure on the string, and seems to be about the best place. If you make it push the string your accuracy will be comprimsed, or at least mine was.
 

· Registered
Joined
·
421 Posts
should be set with gap equall to a business card
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top