Archery Talk Forum banner

SF Premium Riser????

1570 Views 4 Replies 3 Participants Last post by  pencarrow
I just received my new SF Premium riser, beautiful. Only one problem, no instructions as to how to set the limb bolts. The limb bolt design is the same as the Winstar II, but, the limb pocket design is different,so Winstar instructions won't work. So how do you measure how far out in to turn them? Any suggestions? SF or Win&Win needs to make some information available, their web sites are no help...
Thanks
Fritz
1 - 5 of 5 Posts

· Registered
Joined
·
545 Posts
Discussion Starter · #5 ·
Thanks. The design of the limb pocket does not allow for a reference point like the Winstar II. If I had a Winstar II, I could turn the limb bolt all the way in, then count the # turns to back it out to the minimum setting. That should give a good starting point range.

Fritz
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top