Archery Talk Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
184 Posts
I'm not an expert but here's what I did in my situation. I had a bareshaft that was impacting 2 inches to the left of my fletched arrow at 20 yards and the nock end was angled to the right towards the fletched arrow. It was suggested to me that I move my cams to the side that the nock end was pointing. It seemed to work.

I only moved the thinnest shim from the right side of the cam to the left side of the cam. So a little bit goes a long way.

You will have to play with how much to move the cam. There really isn't a definite prescription as to how far to shim.

Good luck!
 
1 - 1 of 1 Posts
Top