Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,595 Posts
Discussion Starter #1
Just looking for info. on sighting in the CBE Tek Hybrid. Is it similar to sighting in an HHA? Does it come with sight tapes? Thanks in advance!
 

·
Registered
Joined
·
924 Posts
Sight in at 30 and 60 yrds (the pin that will be used to float) by marking with a pen or pencil on the slide.
Use the measuring tool to determine which sight tape you need (yes, it comes with sight tapes) from the marks you made on the slide.
Cut,Peel, and stick the tape to the sight by aligning the needle to the 30 yrd mark on the tape (or what ever yardage you are making the float pin).
 

·
Registered
Joined
·
1,595 Posts
Discussion Starter #3
Sight in at 30 and 60 yrds (the pin that will be used to float) by marking with a pen or pencil on the slide.
Use the measuring tool to determine which sight tape you need (yes, it comes with sight tapes) from the marks you made on the slide.
Cut,Peel, and stick the tape to the sight by aligning the needle to the 30 yrd mark on the tape (or what ever yardage you are making the float pin).
Sorry, forgot to clarify, CBE single pin. Thanks for the info. I take it, it would be a similar process for the single pin?
 

·
Registered
Joined
·
614 Posts
Just tapes are opposite in yrd top to bottom
 
1 - 4 of 4 Posts
Top