Archery Talk Forum banner

Solid Draw Stop for PSE Wheel Vector 5 (also known as V5)

475 Views 2 Replies 3 Participants Last post by  huteson2us2
I have a few PSE bows with the Vector 5 cams(wheel design). The draw stop is little mushy(not solid).

I wonder if there is any after-market draw stop (like Bomar) that I can fit onto the bow or cams to get SOLID stop.

http://www.lancasterarchery.com/bomar-draw-stop-for-pse-two-cam-bows.html
1 - 3 of 3 Posts

· Registered
Joined
·
1,863 Posts
Wallbangers.

20 years ago, loads of guys were shooting round wheels with aftermarket stops. Not so easy to find nowadays; often specific to cam/wheel model as well.

They go on the side of the cam and basically constitute a "leg with a peg" to contact the cable much further from the axle and provide a decent wall. Kinda like Rock Mods on Mathews bows nowadays.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top