Archery Talk Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
11,814 Posts
Discussion Starter #1
For those of you who have the software to determine speed I would like to know how much I can expect.

Its a Mathews LX at 65lbs and 28inch draw 60% letoff
it has a tru peep, string loop, and cat whiskers on the string
My arrow weighs a total of 380 including everything and is 28inchs long
about how fast will this setup be?
 

·
Registered
Joined
·
11,814 Posts
Discussion Starter #4
ok thanks guys!....is there anything I could do to gain alittle more speed? Other than getting new arrows or adding poundage
 

·
Registered
Joined
·
8,117 Posts
SB1Hunter said:
ok thanks guys!....is there anything I could do to gain alittle more speed? Other than getting new arrows or adding poundage
Check all your specs! I have been chasing my tail with this for a few days now! :wink: Make sure you BH is 6 5/8 from the center of the berger hole to the "front" side of the string. Cam rotation holes (3/32") should be parallel to the string when the bow is maxed completely out. Do not worry about the ATA distance and just let it fall where it may.
 
1 - 5 of 5 Posts
Top