Archery Talk Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
168 Posts
Discussion Starter #1
I have a Fast Eddie XL in a 10 thous configuration and was wondering if anyone knew something about sending the housing back into to Spot Hogg so they can put a 19 thous pin in. Thanks!
 

·
Registered
Joined
·
14,593 Posts
Call spot hogg and get an RA number. I want to say it is around $30 and they will replace all the pins and fibers with whatever you want for color and size. At the same time they usually look over the rest of the sight and make sure everything is in good working order and will warranty any other problems if there are any.
 

·
Registered
Joined
·
168 Posts
Discussion Starter #5
Call spot hogg and get an RA number. I want to say it is around $30 and they will replace all the pins and fibers with whatever you want for color and size. At the same time they usually look over the rest of the sight and make sure everything is in good working order and will warranty any other problems if there are any.
Awesome, thanks for the info! This was the response I was looking for lol!
 
1 - 5 of 5 Posts
Top