Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Can I lengten draw length with the little rubber set screw that seems to stop the draw by touching the libs on each cam???
 

·
Registered
Joined
·
14 Posts
Discussion Starter #3
just a half... It is at 29.5 now, and I shoot a full 30, it looks like each stop is about 1/4 from the 1 mark
 

·
Registered
Joined
·
1,926 Posts
You can probably get close to a half inch... You need to be careful though because if I remember right you don't set the draw stops to the same setting on top and on bottom. A quick look at the spec sheet will point you in the right direction. As long as it is timed properly and your stops are hitting the limbs at the same time you should be ok.
 
1 - 4 of 4 Posts
Top