Archery Talk Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
109 Posts
Discussion Starter #1
Ok the way I see it cam rotation is on, brace height is on and Idler lean works to center of string at the nock when I run a carbon arrow off the idler wheel. However ATA is 33 1/16 on both sides. So what should I do? Leave it as it is or.... Please be specific if you can because I'm still a rookie at working on my bow. Thanks in advance.
 

·
In 'Da Head
Joined
·
24,266 Posts
Don't touch a thing!
 

·
Registered
Joined
·
17,796 Posts
captnkirk said:
Ok the way I see it cam rotation is on, brace height is on and Idler lean works to center of string at the nock when I run a carbon arrow off the idler wheel. However ATA is 33 1/16 on both sides. So what should I do? Leave it as it is or.... Please be specific if you can because I'm still a rookie at working on my bow. Thanks in advance.
shoot it!!!!!!
 

·
Registered
Joined
·
109 Posts
Discussion Starter #4
Music to my ears. Thank you. I love to tinker and a bit of a perfectionist so this was really bugging me. Now to get down to what is REALLY important - practicing!!!
 

·
Registered
Joined
·
3,451 Posts
poundage

Don't forget to check your poundage with the limb bolts all the way in. If your poundage is good then your good.
 
1 - 6 of 6 Posts
Top