Archery Talk Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
17,786 Posts
Discussion Starter #1
i have a 05 switchy that the axle lenght and cam rotation are spot on,but the brace height is about an 1/8 short,what do i need to do?
 

·
In 'Da Head
Joined
·
24,266 Posts
Did you measure your ATA with the limbs cranked all the way down on the side opposite the shelf?
 

·
Registered
Joined
·
405 Posts
to increase the brace height, put some twist in the string, and put half the number in your cable, if you put 8 twist in your string, put 4 in your cable, then check your brace and see if it needs more. You might consider going over to the mathews website and check their forums for information on this subject
 
1 - 8 of 8 Posts
Top