Archery Talk Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
199 Posts
Discussion Starter · #1 ·
About to buy a Sword Apex but not sure if a micro or the standard would be a better fit for a straight 3D only bow. Any thoughts?

Thanks.
 

· Registered
Joined
·
1,230 Posts
For 3D I use the micro. Allows me to use a smaller peep and still have the housing just fill up the peep sight. The Apex does have a pretty long bar so you might be able to get by with a mid range peep and the full size. I just prefer the micro.

hd
 

· Registered
Joined
·
778 Posts
For 3d, go micro, less is more when it comes to accuracy.
 

· Registered
Joined
·
249 Posts
sword

The micro is what you want. What size pins? How many pins? Really nice sight.
If you get the micro and want to try a large,shoot me a pm I have a large with the short spacers that I do not use. S.ROB
 

· Registered
Joined
·
199 Posts
Discussion Starter · #6 ·
Thanks guys. I guess the micro it is. I plan on getting it with 5 pins. Th first three at .019 and the last two at .010 for the longer distances. Should work out good. Will be placing the order tomorrow.

I was thinking a 3/16" peep. Sound about right with the micro?
 

· Registered
Joined
·
1,586 Posts
that is what I am using with my micro fully extended (2nd to lat hole)! good luck!
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top