Archery Talk Forum banner

1 - 3 of 3 Posts

·
The Western Triangle
Joined
·
2,231 Posts
Discussion Starter #1
I think I doing something wrong....

My set up is a PSE XGX 6 set at 72.5lbs w/a draw of 28.93inches

Arrow is Easton Axis 340's weight is 423grains w/length of 29"

TAP is saying these arrows are too weak and my spine should be like .27??

Any help would be appreicated....
 

·
Registered
Joined
·
4,074 Posts
I think I doing something wrong....

My set up is a PSE XGX 6 set at 72.5lbs w/a draw of 28.93inches

Arrow is Easton Axis 340's weight is 423grains w/length of 29"

TAP is saying these arrows are too weak and my spine should be like .27??

Any help would be appreicated....
I Show and Ideal spine of .2838 based on what you posted. Doing a quick cross-check with Eastons online shaft program shows they recommend a 300 spine as well. (keep in mind this is using LITERAL draw weight and not adjusted draw weight like all charts require)

What TAP shows is correct. There are some things you can do....
Shorten your arrows, lighten the tip and lower your draw weight. I am sure you can get the 340 to shoot, but the 300 or stiffer would be better.
 

Attachments

·
The Western Triangle
Joined
·
2,231 Posts
Discussion Starter #3
Thanks Tony...

I Show and Ideal spine of .2838 based on what you posted. Doing a quick cross-check with Eastons online shaft program shows they recommend a 300 spine as well. (keep in mind this is using LITERAL draw weight and not adjusted draw weight like all charts require)

What TAP shows is correct. There are some things you can do....
Shorten your arrows, lighten the tip and lower your draw weight. I am sure you can get the 340 to shoot, but the 300 or stiffer would be better.
 
1 - 3 of 3 Posts
Top