[auwood74]

Been looking at fletched arrows on ebay and I understand the 8.1 or 9.4grns per inch etc..They dont tell you in the descriptions what the fletchings weigh or inserts. Do any of you guys have a ball park figure on 2' blazers? (seems most popular and thats probably what I will go with) insert weight or nock weight?..Im wanting to stay around 360-400 total weight. If it helps my draw is 27-27.5 and not sure on actual draw weight of the revenge,I just have limbs maxed out, specs say 70#. Arrrow length is around 26.5-27.5 some of the charts have me on the border on spine 400-or 340..I have been reading that its better to be over spined so Im figuring a 330-370 spine..Any input will help..thanks

 

[ElementHunter]

Blazers 6 grains each , Inserts can be different depending on what arrow you purchase . If the arrows are a standard size the inserts will be around 14 grains . Standard nocks around 8 grains . Hope this helps .

 

[auwood74]

Thanks for the help

 

[Deezlin]

Go with a 340-300 spine.

 

[hotrod26]

Go to the Lancaster website and look up what component you want to use. They will usually have the weight on there. If you can get a Lancaster catalog they have all the weights in there.