Archery Talk Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
258 Posts
Discussion Starter #1
i am haveing problems getting my center shot set i read a post here saying it should either be 7/8 or 13/16 i tried both and the problem i am having is this....
my rest is the NAP quick tune micro 3000 prong style well i notice that the inside prong is staying in contact with the arrow just about all the way to the nock i had center set to 7/8 from inside riser to center of arrow and arrow center center of berger holes then changed to 13/16 to center of arrow then i went extream and moved out all that i can which puts me just about 1 inch from inside riser that got me the smallest drag line on arrow shaft but still rubbing to about 1 1/2 - 2 inch from nock on inside and outside prong is not rubbing at all ( i am spraying foot powder spray on arrow to see contact) what do i do now im so confused
 
1 - 1 of 1 Posts
Top