Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,098 Posts
Discussion Starter #1
Ok guys, I am going to be getting some Goldtip Triple X arrows soon and will be shooting them out of a Conquest 4 Minimax 28.5 in draw and 59 lbs... I am using a trophy taker blade rest... So give me your setups using the Goldtips.....I have heard that you need them long with alot of point wieght and that you need them cut at the rest and 150 gr. in the front....I know I know jsut work it out yourself...:wink: But I would think that setups that are close should be giving the same results.....I am just wanting to see how many are for long and heavy and how many of you are for short and light......
 

·
Registered
Joined
·
5,470 Posts
i cut mine 1/2 inch in front of the rest with 100 grain point and fusion vanes.This set up flies great.I always cut the shafts from both ends and buy the cheaper shaft.I was told to try this set up from Tim G and is has worked great
 

·
P#NW045
Joined
·
12,716 Posts
I use a 28" shaft with 100gr up front and 3 blazers on the back. They shoot great any where from 56-73lbs at 29"
 
1 - 4 of 4 Posts
Top