Archery Talk Forum banner

Trophy Ridge sight question

738 Views 5 Replies 5 Participants Last post by  coyote trapper
This might be a dumb question, but i have a matrix and want to change the pins because i have a hard time seeing red. I unlocked the cam and took it down as far as it will go, but it wont come out. How much pressure should i pull on the pin with out breaking the sight?
1 - 6 of 6 Posts

· Registered
Joined
·
37 Posts
i have the same sight and have changed the fiber for the same reason. just unlock the cam and pull gently. it will come out. practice putting back in before replacing fiber. you dont want to order new fiber to length only to break it. just go slow and you will be ok.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top