Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
151 Posts
Discussion Starter #1
How many of you shoot the 1 hole blade model? Other than one model takes two screws through the spring steel & the other takes one, what is the difference? Does one have a advantage over the other?
 

·
Registered
Joined
·
1,183 Posts
Should be the same except for the number of screws through the blades. I use a 2 hole model. In the event that a blade doesnt fit perfectly in the cutout, then a 2 hole will prevent any rotation of the blade(but thats extremely unlikely as long as the screw is in tight). I just got the 2 hole because LAS had the 1 hole backordered.
 

·
Dead Ducks
Joined
·
901 Posts
I have heard the 2 hole is set at a steeper angle. I myself have used the one hole for 3d and indoor and never had an issue. I hear the one to have is the pro model so you can adjust the blade angle. Just my 2cents.
B
 
1 - 3 of 3 Posts
Top