[fstgstdsmpay]

Ok so i got some trouble with a buddys 02 hoyt magnatec with the two cam, cams appear to be sync'd up and draw stop timing is right on. Rest and nock point are perfectly level, no nock pinch, no vane contact on rest. But whats happening is at 10ft im getting a 1.5" high tear. I cant figure it out. So is it possible to add or remove twist to either cam to get rid of this high tear.

 

[fstgstdsmpay]

Ttt

 

[red44]

Some discussion in this link on creep tuning.
http://www.archerytalk.com/vb/showthread.php?s=&threadid=49449

 

[bassman409]

I would try moving the nock down a little before I twisted the strings.

 

[EXTREME 1]

what arrow rest are you using??? If its a drop away then it is dropping to soon and if its a spring loaded rest then you need to add a little more spring tension to the rest.