Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
158 Posts
Discussion Starter #1
When your tuning a bow with Y-cable's and cam stops....... wich cable do you twist if the top cam is not meeting at the same time the bottom or visa-versa ?:confused:
 

·
Registered
Joined
·
1,179 Posts
You can twist on either.
If the top one is getting to full draw first
twist the bottom cam cable(makes it shorter)
or untwist the top cam cable (makes the cable longer)
its your choice

I like to keep the twist in both cables as even as possible....esp with a 2 color string

The two senerios can be switched visa-versa :)

experment with it.....thats how I learned and most of the others on here I'm sure.

If you need more help pm me and I can call you if you like

Good Luck and have fun

Bubba
 

·
edthearcher
Joined
·
6,494 Posts
twist

y cables or commonaly called yokes. now this is not written in stone there are many verables. your yoke cable is also called the buss cable, use this to set your axle to axle, when that is close to what it is suppose to be. than check your draw stop timing, to adjust this you will have to twist up or down what ever is needed. this gets more indepth but that is the bassics
 
1 - 4 of 4 Posts
Top