Archery Talk Forum banner
1 - 1 of 6 Posts

· Premium Member
9,110 Posts
With a hybrid cam, some shooters may need to use a non-standard timing to get proper flight. Assuming your rest is properly adjusted, etc. and you're not experiencing clearance problems, which won't respond to tuning. I have several Hoyt's, and all of my bows shoot the best with the top cam slightly over rotated at full draw. ? Who knows why.

With everything to spec, ATA, BH, and the nock point giving your arrow a position square to the string, try adding a turn to the buss cable. If it's worse, take a turn out and try it again. Still whacky ? repeat the process with the control cable.

Usually, one of these adjustments will give you a direction where a combination of bus/control adjustments will find YOUR sweet spot.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.