[BowKil]

Do you mean without feeding it through the cable first? I wouldn't recommend doing it that way. It'll probably just slide (up) when you draw.

 

[IGluIt4U]

It won't move if you do it properly.. .mine has been this way for years..

 

[Rhinos2]

You can if you have a press, put the cord through your press and melt the end after you release and had have tension back on the string you can serve above the cord so it won't pull up. Another option would be to tie it on your down cable using the same knot you would tie in your loop. Then again serve above.
You can use B-50 or BCY- 62braid. If you do a search on here you'll find a couple of different ways, find the one you like and give it a try.

 

[BreakingTheBend]

what im wondering is "BCY peep and nock thread" going to be good serving thread?

CW

 

[archeryonyx]

Yes you will be fine.

 

[IGluIt4U]

what im wondering is "BCY peep and nock thread" going to be good serving thread?

CW

That's what I use.. from Charm herself.. works great for tying in drop cords, peeps, serving around a string suppressor contact point, etc.. :thumb: