Archery Talk Forum banner
1 - 2 of 2 Posts

·
Banned
Mathew’s v3 27” spot Hogg, hamskea, bstinger, and of course Sitka
Joined
·
117 Posts
I shoot a vxr 31.5 at 26.5draw length I experienced same nock low tears at initial setup… figured out it was due to nock pinch in my nock set… after i took care of that issue i can now shoot the same arrow in a 250 300 and 340 spine tearing bullet holes in paper
V3 27” here at 26.5” draw. String angle is rough, need to definitely leave room for nock pinch, I suggest tying in soft knots inside the loop to prevent the d loop from eventually sliding ( which it will 100%). Couple under over knots and you are golden
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top