Archery Talk Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
34,166 Posts
Hoyt's draw lengths run true....if it's long or short either your strings are the wrong length or your bow isn't setup correctly.:)
 

·
ArcheryLessonsOnline.com
Joined
·
2,013 Posts
It runs 1/4" long in spec. My 29.5" bows measured out at 29.75 exactly.
-Adam
 

·
Registered
Joined
·
34,166 Posts
It runs 1/4" long in spec. My 29.5" bows measured out at 29.75 exactly.
-Adam
It will still get 29.5" though...correct?

I can get a little more then a .25" from them...but they will still get what they are marked to get.
 

·
I am nobody.........
Joined
·
8,659 Posts
On the spirals, at least on my VE, I have found that if the lower cam is dead center of the 2 marks the DL is dead on, provided the A_A is correct and so is the BH, etc. As you go closer to each of the marks you get +-almost 1/2" either way........
 

·
ArcheryLessonsOnline.com
Joined
·
2,013 Posts
It will still get 29.5" though...correct?

I can get a little more then a .25" from them...but they will still get what they are marked to get.
Most definately it will go down to what they are marked at..

-Adam
 
1 - 6 of 6 Posts
Top