Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
250 Posts
Discussion Starter #1
Struggling with nock high paper tear, bareshaft low at 20yds. Hoyt CD 34, 65# limbs, 62# pulling. ATA 33 31/32.BH 7 1/16. (have shot/used various arrows 300-350 spine 425 - 460 grain during tuning)

Had set in D SLOT for my D 30.25.... Cam feels kinda wonky in this slot and jumpy, but otherwise I couldn't get nose to string at full draw.
Kept lowering nock pt and rest but started getting fletching contact.

Switched to C SLOT (DL about 29. 75). Had to abandon touching nose to string as anchor pt getting really high and I wondered if my back elbow was not level/parallel with arrow. I think will just use my peep and put it a kisser button
But this seemed to FIX my nock high tear. (its super cold out so haven't been able to go shoot bareshaft or broadheads) but my paper tune looks WAY BETTER.
How come I couldn't tune with my DL that felt better? It's weird not having nose on string but I think I can get used to it. I otherwise love bow and how it shoots
I have read others posts from 2016 and 2017 on vertical nock travel on these cams.
What did I fix or did I just bandaid a bigger issue?
Thoughts?
 

·
(aka lug nut)
Joined
·
48,311 Posts
D slot should be 30.5-inches DL. C slot should be 30-inches DL. For some reason, idaboy2017 is running 1/4-inch short on DL (nearly never happens). So, if D slot is "wonky and jumpy", and he has high paper tear...I agree with RTILLER, cam sync may be WAY WAY off.
 
1 - 3 of 3 Posts
Top