Archery Talk Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
2,151 Posts
Discussion Starter #1
I am looking for the tunning charts on the 2005 Hoyt VTec. I looked on the Hoyt site but they don't have any posted but I am looking for information on a 28 to 29 inch draw on a 60 to 70 lbs Vtec. Cam.5
 

·
Registered
Joined
·
2,151 Posts
Discussion Starter #3
They have the 27.5 to 29 cams now.
 

·
Registered
Joined
·
2,151 Posts
Discussion Starter #5
Ok but what I was looking for was the A to A lenght and brace hieght measurments and all those measuremnts like on the tune charts for the 04 models.
 

·
Registered
Joined
·
2,151 Posts
Discussion Starter #6
I made a mistake on the cam draw and they are the 27 to 29.5. diddnent realize it before. It is for two bows which are the same except one is custom color and one is camo.
 

·
Registered
Joined
·
19,164 Posts
BugZ said:
Ok but what I was looking for was the A to A lenght and brace hieght measurments and all those measuremnts like on the tune charts for the 04 models.
Ok...

V-Tec

E-5 cam... 27.0 - 29.5"

A to A = 35.5"
Brace = 6 7/8"
String= 53.5"
Control = 40.5"
Buss= 37.75"


F-6 cam 28.0 - 30.5"

A to A = 35.5"

Brace = 7.0"
String= 54.5"
control= 40.75"
Buss=37.75"


I just wanted to make sure of the proper cam and not spend all night typing information you didn't need... but what the hey...
 

·
Registered
Joined
·
2,151 Posts
Discussion Starter #8
Thanks Javi I appreciate it.
 

·
Registered
Joined
·
2,151 Posts
Discussion Starter #9
Javi one other question the cams say H-5 on them. will that make a difference. The sticker does say 27 to 29.5, 60 to 70 lbs.
 

·
Registered
Joined
·
19,164 Posts
BugZ said:
Javi one other question the cams say H-5 on them. will that make a difference. The sticker does say 27 to 29.5, 60 to 70 lbs.
No problem... The H stands for regular cam & 1/2... the "5" is the 5th letter of the alphabet..."E"... the RT and RB stand for right hand top and right hand bottom...
The first cams were marked with the letter and the modules with the numeric equavlent...
 

·
Registered
Joined
·
2,151 Posts
Discussion Starter #11
Thanks again.
 
1 - 11 of 11 Posts
Top