Not sure about the fletch because I fletch my own but I did not like the factory wraps. I had a problem with a glue run that required me to strip the fletch. They looked cool but were made of a heavy Scotch tape like stuff. After seeing what the first one was made of I cut the factory wrap off the other 11 arrows and put my own wraps on. Just basic white ones.

 

I just emailed easton about this very thing. I asked about the bloodlines and they said 2 to 3 deg helical with blazers. I am guessing it will be the same on all there lines

 

yep, 3 degree helical is what came on mine.

 

Don't do it. The factory wraps are complete garbage. You need to raw shafts and strip the wraps and replace them with good ones (or go without if you prefer) and then either cut and fletch yourself or, if necessary, take to a shop and have it done. I fletch mine with RW helical.

 

Good info, THANKS! I've heard this more than once about the wraps, definitely will keep that in mind.

 

Whats wrong with the factory wraps? I shot mine a TON and they were fine.

 

The Easton wraps tend to be a bit heavier than your standard wrap. Buy we have never had any issues or complaints from our customers.. Fletched if you do not mind the minuscule weight or un fletched to save a grain or 2 and a few bucks..