I believe i heard it on here. Take one of your practice blades, heat it up and shove it into the foam to create a cavity to hold the broadhead. I currently have a Hoyt quiver for my Maxxis and I'll be doing this very shortly.

 

havent heard that before but thanks man. may have to try that out.

 

My fuse quiver has no foam

 

Kwiki makes a quiver which will handle both mech & fixed. It's a 4 arrow. I have one and it's works very well.

 

I have the Kwikee Kwiver its called the Combo quiver. And I shoot the Snyper, which is similar to the Rage, and it works perfectly no complaints. I BOUGHT IT LOCALLY FOR 29.99. Take a look at it you won't be sorry.

 

beyond heating the practice blade...also look into a quiver with two sets of arrow holders that will suspend the broadhead. Thus, broadhead will not have to rely on foam, etc. for support. I'd even remove the foam and leave protected by plastic cover.
good luck.

 

Two choices in my opinion Rage has come out with a new quiver this year you could try the one.

Alpine soft loc quiver has two pieces of foam in it one large outer piece and a small inner piece take the large one out and the other will just grab the tip of the arrow I dont shoot Rage anymore but this quiver worked when I did...

 

I have one of the magnetic quivers from Octane.. I don't shoot rages (lesson learned) but it should work (no foam)
Posted via Mobile Device

 

Apex Nano!:darkbeer:

 

ttt

 

Have you tried wrapping dental floss around the broadhead, I heard that works pretty well.

 

Octane Magnetic Hood Quiver :wink:

No issues at all.

 

the trophy ridge arrow cage 1 and arrow cage 2 work well with Rages.

 

I use a Treelimb and have no problems at all with the Rage's. There are holes in the foam that are plenty big and wont touch the blades.

 

Octane
The magnetic hood insert holds arrows using rare earth magnets rather than foam. The hood, gripper and machined aluminum spine work together to eliminate vibration. Centerline Mass Balance adjusts for personal balance preference.

The One-Piece Quiver can be attached and detached by hand in a single motion. The Two-Piece Quiver is the first two-piece quiver with quick-detach capability.

360° adjustment

Quick-detach capability

Includes closed-cell foam and magnetic hood inserts




It's what i have but it is heavy

 

Rage ghost quiver. Problem solved

 

Would this fit on your bow? :jksign: