[stevenautique]

Im shooting a tribute (71#s, 27" draw, 26" arrows)

I am interested in the maxima hunters and CX edge. according the charts i am on the edge of 250 or 350. any one have any suggestions which spine is correct? I like the smaller diameter of the cx edge. Havent heard much about them. any experiences with them?

Thanks

 

[xXxSABERxXx]

i would go with the 350 for your draw weight

 

[Hemingway]

250's. The nock travel on the binary system puts it more in the "medium" cam catagory... at least that's what Crackers tells me.

 

[nuts&bolts]

Im shooting a tribute (71#s, 27" draw, 26" arrows)

I am interested in the maxima hunters and CX edge. according the charts i am on the edge of 250 or 350. any one have any suggestions which spine is correct? I like the smaller diameter of the cx edge. Havent heard much about them. any experiences with them?

Thanks

stevenautique:

The CX Edge 250 or CX Edge Hunter 250 shafts
spine the best with your specs

if you drop the draw weight a little down to 68 lbs or so


(68 # draw weight)
(27" AMO draw length)
(26" arrow shaft length - not including the nock or insert length)

 

[stevenautique]

stevenautique:

The CX Edge 250 or CX Edge Hunter 250 shafts
spine the best with your specs

if you drop the draw weight a little down to 68 lbs or so


(68 # draw weight)
(27" AMO draw length)
(26" arrow shaft length - not including the nock or insert length)

I like the way it is set up now. Is the 250's ok with my current setting or do i need to either go down in #'s or upto the 350's?

 

[meanv2]

Steve,
You will be fine with 250's at your arrow length even at 71#. I shoot 250's at 27" out of my Allegiance (70#) and they are bullet holing

 

[stevenautique]

Steve,
You will be fine with 250's at your arrow length even at 71#. I shoot 250's at 27" out of my Allegiance (70#) and they are bullet holing

Thanks Meanv2