Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
505 Posts
Discussion Starter #1
I just got a wrath sho and once I get to full draw it makes a clicking noise. It sounds like it is coming from the draw stops that go to the cables. It has the badger cam 2. Anyone know how to fix this? Thanks
 

·
Registered
Joined
·
19,793 Posts
http://strotherarchery.com/support/technical-support/2013tuningvideo

This video shows how to time the bows with the badger cams so that you don't have that click sound. The "cable stops" are not actually supposed to hit the cables. They should stop about 1/16th inch short. Set the limb stops, on a draw board, so that they solidly hit the limbs and the "cable stops" have a 1/8" gap from the cables. Then at full draw the "cable stops" won't touch the cables.
 

·
Registered
Joined
·
505 Posts
Discussion Starter #3
http://strotherarchery.com/support/technical-support/2013tuningvideo

This video shows how to time the bows with the badger cams so that you don't have that click sound. The "cable stops" are not actually supposed to hit the cables. They should stop about 1/16th inch short. Set the limb stops, on a draw board, so that they solidly hit the limbs and the "cable stops" have a 1/8" gap from the cables. Then at full draw the "cable stops" won't touch the cables.
OK. Thank you very much for the information
 
1 - 3 of 3 Posts
Top