Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
So I bought an older Hoyt on craigslist thinking it was about the right draw length, well it is a bit too long and I am looking to change out the main cams to shorten it up. It has an MC3T and an MC3B on it, the guy at the local archery shop said he could not order parts for it but suggested an MC1T and MC1B to get my draw length correct. I am new to bows and honestly don't know what this all means but if any one has these parts please let me know. Thank you Andrew

Oh the bow is a Hoyt Raptor with Intruder limbs 29" draw length. I need something in the 27"-28" range
 

·
Registered
Joined
·
3 Posts
Discussion Starter #2
So from what I can tell the bow has Hoyt Mastercam series cams on it and I need the #1 or #2 cams to shorten it to where I need it. Again thanks for any help
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
I just learned that a #1 Module or B Module for the Mastercam series or Advanced Cams series would also shorten my draw down an inch.
 
1 - 3 of 3 Posts
Top