[GATOR-EYE]

The Draw Legth On The Bow Was 27.5" I Took To It A Shop And Had It Changed To 28.5. Now The Question Is This With The Draw Length At 27.5 My Rest Was Centered At 11/16" And It Paper Tuned And Did Walk Back Tune And It Shot Good, Now After They Changed The Cam They Tuned It And Have The Center At About 5/8" . Now It Seems The Sights Are Right Next To The Riser When Sighting In The Bow. Could They Have The Rest Center Off? Will Changing The Draw Lenth Change The Center Of The Rest? Should I Just Do A Walk Back Tune And Trust There Paper Tune? I Shot It A Few Times And The Arrows Looked Like They Were Fling Straight. Any Comments Or Suggestions?? Thanks

 

[panthru]

i would set it at 13/16 from riser to center of shaft and go from there. :wink:

 

[Mr Hyde]

I would double check and make sure the bow is in spec then walk back tune.

Bartman here on AT makes a tool you should try out, it's called The Rest Assured. The Rest Assured allows you to mark your center shot and keep it. Any questions about it just shoot Bart or myself a P.M.