Get the Black Eagle Rampages in .300 spine and then add a 50 Grain Brass HIT insert. You will get high FOC and not be overly stiff on the spine.

 

I can get bare shafts for 7 bucks a piece. Can't find anywhere that sells the rampages anywhere. Plus I have no idea how those out serts work and everything

 

You dont need outserts with the Rampage arrows if you use the Easton Brass HIT. Steves Archery Arrows and many other places can order them for you or you can get them from Black Eagle yourself.

 

Can u get bear shafts? And how much do the brass hit inserts cost?

 

Yes you can get bare shafts. Brass hits can be bought through Lancaster archery or any other larger archery store prices vary quite a bit so check around.

 

I got mine from Steve's Archery Arrows..

Rampages .350s with brass hit inserts.. bad boys weigh in at 425gr, how heavy you want to go?

 

I'm shooting maybe 340 grain arrows and I feel like I need to be around 400 grain arrows to get more penitration

 

Alright thanks. If I do the set up your telling me to do will I have the right spined arrow if I shoot my draw waight from 65-70

 

Ttt

 

might try these arrows this year also, they have very good reviews overall

 

Ttt

 

go aluminum, and go heavier, up around 460+ you can easily meet that weight and a 350 spine with either a 2315 or 2413

 

Call Jerry at SSAS he will set you up. Just got me some carnivores 300 with 100gr brass inserts and 100 gr point 26.5in comes in at 460gr with 18% foc

 

i was also considering gold tip xt hunters. a little heavyer arrow and i would probably go to a 125 grain head. a little bit heavyer arrow a little more waight up front and alot cheaper when it comes to getting bare shafts. what you guys think of that?

 

Easton Axis 340 spine 9.5 gpi, at 27" long and 100 grain tip weight will be about 400 grains.
Axis.....http://www.eastonarchery.com/arrows/axis/0/2

Easton Bloodline 330 spine 8.7 gpi, at 27" long and 100 grain tip weight willbe about 385 grains.
Bloodline.....http://www.eastonarchery.com/arrows/bloodline/0/2

 

Still looking at the rampages. Will it be okay if I used the 300 spine with the 50 grain hit inserts at 29 inch arrow? How overly spined will I be? Thanks

 

Just looked at the sizing chart and even at 29 inches its telling me to use .350. So would I be okay with a 28 inch arrow with the 50 grain brass hit insert at with a .350 spines arrow. Would I be underspined then? Thanks again

 

Think you will be underspined with a .350 spine and the 50 grain Brass HIT inserts on your set up but that is just a guess on my part because I do not have OT2. I would call Steve at Steves Archery Arrows and get him to run your numbers in OT2. I shoot 72 lbs and use the .300 spine arrows cut to 28.75" and am just about perfectly spined.

 

Steve says .300 spine and the chart on black eagle is telling me 350. What the heck lol. I guess a person who knows what hes talking about is better than a chart lol. Thanks guys

 

I believe the black eagle chart is based on 100 grain tips. if you shoot 125 you need a stiffer spine. call black eagle and they will help you out. very cool guys to work with.

 

black eagle has some great customer service guys. i'm shooting the carnivores with 20gr weights on the back of the inserts in 350spine. they weigh out around 373 for me. which is were i wanna be exactly because this is my dual purpose hunting and 3d arrow. havent chrono'd yet with them but should be around 311ish