What bow is that? Take a picture of the entire bow because something is terribly wrong with your buss cable besides being worn out.

 

You have some very serious problems and need hands on help from a real pro shop not some box store.
Where did you get this bow from, you buy it used because you surely haven't been using it like that.

 

dont try to draw that back, it will derail. that cable and string need to be replaced then it needs to be yoke tuned for cam lean

 

You would be better off in a newer bow and a name brand bow. Cabela's only put's their name on a bow. They buy bow's from several suppliers and slap their sticker on it.

I recommend looking at Hoyt, Mathew's, PSE, Bowtech, Darton, Elite, primarily if you have a bowshop near you, lean heavily towards the brands they carry.

Good luck,

 

hello just trying to get some opinions.
i know it needs a new string and cable set. the idler wheel pulls like heck to the right .
and there is like 30 lbs. pull with the limbs bottomed out .

From the look of it, your cam timing is way out. Also, your Y cable could use some adjustment to get the idler wheel back straight.

What's the bow measure ATA? According to the Cabela's website (if it's still the same bow) it should be around 30 1/2". Based on that, and your low draw weight, I'd guess that your string is either way too long or your cable is way too short.