[luckyjb2]

I think that you may have some old glue. I use the Impact Tough for inserts and the Gorilla Glue Gel for my fletches and it never takes over 30 seconds for either to set up.
I keep them in the fridge and have still had some age out on me.
Something weird happened to me one time - I used the gel straight out of the fridge and it took along time to set up at first. After it got up to room temperature it was back to the normal 30 seconds per fletch so now I make sure it is warmed up prior to starting fletching.
JB

 

[rockyw]

True the blue top takes less than 5 min. but that's what I give it. I put one small drop each end and one in the middle. I use the tip to spread it out even.

 

[Kyarcher95]

I use Gorilla super glue gel. Apply a thin bead, and when I put the clamp on the jig, I apply a little pressure for a few seconds, to make sure the vane or feather seats good to the shaft. It only takes a short time to dry. The main thing is to not use too much glue.

 

[Larry brown]

Buy a tube of your glue and then get a bottle of Loc Tite Control Gel and tell me which one drys faster. I tried the Gorilla glue once and maybe I got the wrong kind but it was runny but it did dry fast.

 

[slatz]

Glue is glue!

 

[bsharkey]

Glue is glue!

No it is not

 

[BUSHfire]

Ok I will try a new bottle, let it warm up good and put the thinnest layer possible on and go from there. Thanks to all.
And ya I have no clue what the glue is glue comment was, troll I suppose.

 

[slatz]

I didn't mean it like that. I meant a super glue type isthesams others. And gels that dry a little slower are the same. At least what I've found.

 

[Boatman71]

I clean my arrows with acetone, fletch them with blue cap gorilla glue using an AZ EZ Fletch and can shoot them in minutes.

 

[BUSHfire]

maybe winter time will help me as well with waaaay less humidity.

 

[duda]

I use crazy glue gel and I press the vane to the arrow and count to 30. After 30 seconds it's dry enough to move to the next vane but will come off if pulled.