http://www.archerytalk.com/vb/showthread.php?t=1983854&highlight=adjusting+2nd+3rd+axis

This is what i do with my MBG Vengeance.

 

Thanks. I'm wondering more WHERE on the sight are the screws to adjust?

 

I have a 6" Dovetail on mine and it is where the Dovetail joins the sight housing where they join together, right before the hinge . Your instructions should show you where the setting screw's are.If your Ascent doesn't have a Dovetail mount , you won't have a 3rd axis adjustment.

 

Call black gold. I am sure they will email or mail you a new set of instructions or just walk you through the setup.

 

The screw facing the camera is the 3rd axis. Turn it right and it swings the sight "in" turn it left and it swings the sight "out." Be careful because it adjusts with very little turning. If you don't have the dovetail I don't believe you can adjust the 3rd axis.

 

Thanks, very helpful. how about 2nd axis? Thanks again.

 

The two screws that hold the sight the dovetail bracket. One of the screw slots are oval.

 

subscribed

 

marked

 

Umm yes you can adjust all three axis on the fixed mounts, I have three of them.